LG 42VS20 User Manual page 43

42
CUSTOMIZING SETTINGS
Setting
Tile Mode Tile Mode
Auto Config.
PC Position
PC Size
Natural
Reset
PIP/PBP Displays videos and pictures stored on the USB storage in the secondary screen.
Option
Mode
Position
Size
y
Fail Over If there is no input signal, it automatically switches to another input with signal.
DPM Select A user can choose to turn the power saving mode on / off.
Key Lock
Product/Service You can find informations about Software Version, Serial No, F/W version and IP Address.
Info.
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Moving the screen position horizontally and vertically.
Adjust the horizontal and
of the bezel.
The image is omitted by the distance between the screens to be naturally
shown.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Adjusts the position of the secondary screen.
Adjusts the size of the secondary screen.(1 to 10)
NOTE
The Position and Size options are enabled only in PIP mode.
Description
vertical size of the screen taking into account the size