Mercedes-Benz GLE 2018 Supplement To The Owner's Manual page 16

14
Changes as compared to the Owner's Manual
Tension upper anchorage strap from the lug‐
#
gage compartment. Comply with the manu‐
facturer's installation instructions when
doing so.
GLC and GLC Coupé
The upper anchorage points are attached to the
rear of the rear seat backrests.
Move head restraint 1 upwards.
#
For an upper anchorage strap with one belt
#
strap, route the upper anchorage strap under
the head restraint 1 between the two head
restraint bars.
For an upper anchorage strap with two belt
#
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint 1.
Guide upper anchorage strap downwards
#
between luggage compartment cover
rear seat backrest 2.
Securely fasten the attachment clip, which is
#
part of the upper anchorage strap, to the
upper anchor fitting 4 on the back of the
rear seat backrest 2.
Tension upper anchorage strap. Comply with
#
the manufacturer's installation instructions
when doing so.
Make sure that upper anchorage strap is not
#
twisted.
Move head restraint 1 back down again
#
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
CLS Coupé
The upper anchorage points are installed in the
rear compartment behind the head restraints on
the parcel shelf.
3 and
Move head restraint
#
Fold up cover 2
#
3.
1 upwards.
of upper anchorage point