Table of Contents
Advertisement
If one of the group members takes the floor, you will
see the member's name and Sprint PCS Ready Link
number on the display.
4.
When the call is finished, press
Tip:
The phone beeps if you press the Ready Link button when
another contact has the floor.
You can also make a Group Call after checking the group
member. Press Menu/OK to display group members,
highlight <Call Group> and press and hold the Ready Link
button during step 3 above.
To redial your last Sprint PCS Ready Link call, highlight
Redial and press and hold the Ready Link button from the
Sprint PCS Ready Link List.
Making a Sprint PCS Ready Link Call by Entering a
Number
To place a Sprint PCS Ready Link call by entering a number:
1.
From standby mode, enter the Sprint PCS Ready Link
number you want to dial.
2.
Press
Continue holding
The contact's name appears on the display if there is
a matched number in your Sprint PCS Ready Link
List.
3.
Continue with the Sprint PCS Ready Link call while
pressing and holding
4.
When the call is finished, press
- or -
150
to place the Sprint PCS Ready Link call.
.
Section 2J: Using Sprint PCS Ready Link
.
.
Advertisement
Table of Contents
