Trusted Platform Module - Tpm (Depending On Configuration); Enabling Tpm; Disabling Tpm - Fujitsu STYLISTIC V727 Operating Manual

Trusted Platform Module - TPM (depending
on configuration)
Trusted Platform Module TPM
To use the TPM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
password (see "Security functions", Page

Enabling TPM

• Requirement: You have set a supervisor password, see
► Call up the BIOS Setup and select the Security menu.
► Mark the TPM Security Chip Setting field and press the Enter key.
► Select Enabled to activate the TPM.
Once you have activated the TPM the Clear Security Chip option appears.
Select Clear Security Chip to delete the holder in the TPM. By clicking on Enabled,
all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by applications are deleted.
Please note that you will then no longer be able to access the data you have
encrypted with the keys based on that holder.
► In the Exit menu, choose the option Exit Saving Changes.
► Press the enter key and select Yes.
The tablet PC restarts and the TPM is switched on after the reboot.

Disabling TPM

• Requirement: You have set a supervisor password, see
► Call up the BIOS Setup and select the Security menu.
► Mark the TPM Security Chip Setting field and press the Enter key.
► Select Disabled to deactivate the TPM.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The tablet PC is rebooted and the TPM is disabled.
Fujitsu
50).
"Security functions", Page
"Security functions", Page
Security functions
50.
50.
57