Name Plate And Decals - MULTIQUIP MVC-90H Operation And Parts Manual

MVC-90H PLATE COMPACTOR — NAME PLATE AND DECALS

NAME PLATE AND DECALS

2
CAUTION
Fill up the sumps with oil before
starting
Engine : Automobile engine oil
3
Vibrator : Automobile engine oil
Warm up the engine at idle speed
for 3~5 minutes
4
DANGER
PINCH POINT
NPA-628
PAGE 32 — MVC-90H PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #3 (01/10/11)
1
CAUTION
READ
OWNER'S MANUAL
NPA-629
SAE #10W~30
SAE 10W~30
NPA-306 *
l
READ OWNER'S SERVICE MANUAL BEFORE OPERATING OR
SERVICING THIS MACHINE.
*
ALWAYS KEEP UNAUTHORIZED, INEXPERIANCED,
UNTRAINED PEOPLE AWAY FROM THIS MACHINE.
MAKE SURE ALL SAFETY DEVICES ARE OPERATIONAL
BEFORE THIS MACHINE IS STARTED. MAKE SURE ENGINE
IS TURNED OFF AND SPARK PLUG WIRE DISCONNECTED
BEFORE SERVICING THE MACHINE OR COMING IN
CONTACT WITH ANY MOVING PART. IF EQUIPMENT IS
POWERED BY AN ELECTRIC MOTOR, DISCONNECT
ELECTRICAL PLUG.
NEVER LEAVE MACHINE UNATTENDED WHEN OPERATING.
ALWAYS STOP ENGINE AND ALLOW ENGINE TO COOL
BEFORE ADDING FUEL OR OIL.
*
CAUTION
NPA-329 *
5
7
Serial No.
Model No.
WATER TANK
6
NPA-32 *