Self Record Using The Remote Control (Setting The Self Timer) - Samsung VP-D964Wi Owner's Instruction Manual

ENGLISH
Basic Recording

Self Record using the Remote Control (Setting the Self Timer)

✤ The SELF TIMER function works only in <Camera> mode.
➥page 19
✤ When you use the SELF TIMER function on the remote control, the
recording begins automatically in 10 seconds.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Press the [SELF TIMER] button until the appropriate
indicator is displayed.
4. Press the [Start/Stop] button to start the timer.
I
SELF TIMER starts counting down from 10 with a
beep sound.
I
If you want to cancel the SELF TIMER function
before recording, press the [SELF TIMER]
button.
5. Press the [Start/Stop] button again when you wish
to stop recording.
[ Notes ]
I
Do not obstruct the remote control sensor by putting
obstacles between the remote control and
Camcorder.
I
The remote control range is 4 ~5m (13 ~17 ft).
I
The effective remote control angle is up to 30
degrees left /right from the centre line.
I
Using a tripod is recommended for delayed
recording.
38 38
✤
➥
✤
1
3
œ
4 5
Q U
I C K
M E
N U
I
I
I
I
I
I