Table of Contents
Advertisement
Recording
Symptom
When the screen is exposed to
direct sunlight during recording,
the screen turns red or black for an
instant.
During recording, the date/time
does not display.
The beep sound is not heard.
There is a time difference between
the point where you press
Recording start/stop button and
the point where the recorded movie
starts/stops.
The recording stops.
You cannot record a photo image.
(SMX-C13/C14 only)
Do not leave the camcorder with the LCD screen exposed to direct sunlight.
•
"Date/Time" is set to off. Set the "Date/Time" to on.
•
Set the "Beep Sound" to "On."
•
The beep sound is temporally off while recording movies.
•
•
When the Audio/Video cable jack is connected to the camcorder, the beep
sound will automatically turn off.
On your camcorder, there may be a slight time delay between the point
•
when you press Recording start/stop button and the actual point where
the recorded movie starts/stops. This is not an error.
The internal temperature of your camcorder is unusually high. Turn off your
•
camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off your
•
camcorder and leave it for about 1 hour in a cool place.
Set your camcorder to Record mode.
•
•
Release the lock on the write-protection tab of the memory card if set.
The storage media is full.
•
Use a new memory card or format the storage media.
Or remove unnecessary images.
Explanation/Solution
page 24
page 73
page 35
page 87
English_121
Hide quick links:
Advertisement
Table of Contents
