Installing C/CS-Mount lens
Before mounting a lens, please check whether it is a C-mount or
CS-mount lens.
The back focus has set for CS-mount lens at the factory.
If the mount is changed to the C-mount lens, it may need to
be re-adjusted.
In case of mounting a CS-mount lens
◆
After removing the protecting cap, attach the lens into the
camera by turning clockwise.
NOTE
•Use the lens under the specification as shown. Otherwise
the lens can damage the camera or abnormal fixing may be resulted in.
•A heavy lens may disturb the balance with the camera and possibly results in damage.
Don't use more than 450g lens.
•It is recommended to set the lens ALC mode to Av mode (Average).
Pk mode can be occurred hunting.
14
COLOR CCD CAMERA
C-mount lens : 10 mm or less
CS-mount lens : 5 mm or less
In case of mounting a C-mount lens
◆
1. After removing the protecting
cap, loosen the Back focus lock
screw with screwdriver.
3. Attach the lens into the camera
by turning clockwise.
5. Tighten the Back focus lock screw
with screwdriver.
2. Turn the Focal length adjusting
knob to counterclockwise until
locking.
4. Turn the Focal length adjusting
knob to clockwise slowly at the
best point.
NOTE
•Do not turn the Focal length adjusting knob
too much to clockwise after clicking when
use CS-mount lens.
COLOR CCD CAMERA
15