Setting The Zero Memory (Sc-D457 Only) - Samsung SC-D455 Owner's Instruction Book

[ ENGLISH ]
Basic Recording
÷ The Zero Memory function works in both Camera and Player modes.
÷ You can mark a point on a tape that you want to return to following playback.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE.
Press the ZERO MEMORY button on the remote control before the recording or during playback
at the point where you wish to return.
• The time code is changed to a tape counter that is set to Zero Memory with the
[] 0:00:00 (Zero Memory indicator).
• If you want to cancel the Zero Memory function, press the ZERO MEMORY button again.
Finding the zero position.
• When you have finished playback, fast forward or rewind the tape in stop mode.
The tape stops automatically when it reaches the zero position.
• When you have finished recording, set the Power switch to PLAYER and press the
(REW) button.
The tape stops automatically when it reaches the zero position.
5. The tape counter with the [](Zero Memory indicator) disappears from the display and
the tape counter is changed to the time code.
0FF
[ Notes ]
• In the following situations,ZeroMemory mode may be canceledautomatically:
At the endof the section markedwith the Zero Memoryfunction.
When the tape is ejected.
When you removethe Batterypack or powersupply.
• The Zero Memorymay not function correctlywhere thereis a break betweenrecordingson the tape.