1. Introduction (continued)
Name of parts
Wireless LAN Dongle
Lamp
(Blue LED)
The lamp shows the state of product when it is connected to
the servo driver.
●
Lights on:
The state when the power is supplied to the product but it
is not communicating with the application. (Standby state)
●
Low speed blinking (Light off 1 sec. Light on 1 sec.):
The state when communicating with the application.
(Communicating state)
●
High speed blinking (Light off 0.1 sec. Light on 0.1 sec.):
The state when the product failed to initialize and cannot
communicate. (Error state)
●
Lights off:
The state when the power is not supplied to the product.
(Non-energized state)
- E12 -
Outline
This product is the wireless LAN dongle which enables the
wireless connection between the servo driver and your ter-
minals (PC, smartphones, tablet type terminals) by connect-
Connector
ing to the servo driver. When you use the Windows OS ap-
plicable setup support software "PANATERM" or the iPhone
terminals and Android terminals applicable setup support
software "Panasonic Motor Setup App," it is required to con-
nect your PC and servo driver with cables, but the wireless
system will be possible by using this product.
By using this product and setup support software, primarily
the following items will be realized in wireless communica-
tion.
・Edition of parameters for the servo driver
・Monitoring the operation and inner conditions
・Monitoring and clearing the alarm
Wireless
LAN
connection
- E13 -