Setting 3 - Samsung NX100 User Manual

Camera settings menu

Setting 3

Learn about the menu items of the Setting 3.
To set Setting 3
In Shooting mode, press [m]
options,
Item Description
• Sensor Cleaning: Remove dust from the sensor.
• Start-Up Action: When on, the camera performs
sensor cleaning each time you turn it on. (Off*, On)
As this product uses interchangeable lenses, the
Sensor
sensor can get dust on it when you change lenses.
Cleaning
This can lead to dust particles appearing in the photos
you take. It is recommended not to change lenses
when you are in a particularly dusty area. Also, make
sure to attach the lens cap to the lens when not using
it.
Select the video output signal appropriate for your
country when connecting the camera to an external video
device such as a monitor or TV.
• NTSC*: US, Canada, Japan, Korea, Taiwan, Mexico
• PAL (Supports only PAL B, D, G, H, or I):Australia,
Video Out
Austria, Belgium, China, Holland, Finland, Germany,
England, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand,
Norway
Item
► ►
\
an option.
* Default
Description
When you connect the camera to an HDTV that supports
Anynet+ (HDMI-CEC), you can control the play function of
the camera with the TV remote control.
Anynet+
• Off: You cannot control the play function of camera
(HDMI-CEC)
with the TV remote control.
• On*: You can control the play function of camera with
the TV remote control.
When you connect the camera to an HDTV with an HDMI
cable, you can change the resolution of the image.
• NTSC: Auto*, 1080i, 720p, 480p
• PAL: Auto*, 1080i, 720p, 576p
HDMI Size
If the connected HDTV does not support the resolution
you select, the camera sets the resolution one level
lower.
* Default
95