DIVIDING A VIDEO
You can divide a video into two, and easily delete a section you no longer need. As this function
edits the original fi le, make sure to back up the original before dividing it.
PRECHECK!
•
Insert a memory card. page 28
•
Select the Play (
) tab on the LCD screen to select the Video play (
1. Touch the Menu (
2. Touch the video you want to edit.
•
The selected video is displayed as paused.
3. Search for the point of division by touching the playback
control tabs.
•
Playback control tabs:
4. Touch the pause (
touch the Cutting (
•
A message appears asking for your confi rmation.
5. Touch "Yes."
•
The video you selected is divided into two video clips.
•
The second clip of the divided video is displayed as the last
thumbnail.
•
After the division, you can partially delete an unnecessary section or combine it with other
videos.
Do not eject a memory card or power off the camcorder while editing a video recorded on the storage
media. Doing so may damage the storage media or data.
•
You can also operate this function in the full and single image display modes.
•
You can not divide fi les that are protected (
•
The divided video may drift before or after the division point by approximately 2 seconds.
•
The Divide function is not available under the following conditions:
- If the total recorded time of the video is less than 6 seconds.
- If you try to divide sections without leaving 3 seconds at the beginning and the end.
- If the remaining memory space on your memory card is less than 15MB.
- When the number of fi les on the card reaches 9999.
•
You can not divide photos.
) tab "Edit" "Divide."
/
/
/
/
) tab at the point of division, and then
) tab.
/
HD
SD
/
). Cancel the protect function fi rst. page 70
) mode. page 40
Edit
Divide
Combine
1/1
00:00:25/00:00:50
100_0013
Divide
71