Gas
refrigerant port
Drain hose
connection port
NOTE
• The designs and shape are subject to change
according to the model.
Step 8 Performing the gas leak test
Liquid
To identify potential gas leaks on the indoor unit, inspect
refrigerant port
the connection area of each refrigerant pipe using a leak
detector for R-410A.
Before recreating the vacuum and recirculating the
refrigerant gas, pressurize the whole system with
nitrogen (using a cylinder with a pressure reducer) at a
pressure above 4 MPa in order to immediately detect
leaks on the refrigerant fittings.
Made vacuum for 15 minutes and pressurizing system
with nitrogen.
Insulator
Liquid side
Step 9 Insulating the refrigerant pipes
Once you have checked that there are no leaks in the
system, you can insulate the piping and hose.
1 To avoid condensation problems, place Acrylonitrile
Butadien Rubber separately around each refrigerant pipe.
No gap
NOTE
• Always make the seam of pipes face upwards.
Gas side
NBR
English
15