Table of Contents
Advertisement
using with a Windows computer
USING THE Intelli-studio PROGRAM
Using the Intelli-studio program built into your camcorder, you can transfer video and photo
fi les to your PC using a simple USB cable and edit them on your computer screen. Intelli-studio
offers the most convenient way for you to manage your video and photo fi les.
1. Set "USB Connect: Mass Storage" and "
2. Connect the camcorder to the PC with the USB cable.
window.
3. Click "Yes". The video/photo uploading procedure starts.
Click "Yes" to confi rm.
To disconnect the USB cable
To disconnect the USB cable after completing the fi le transfer, you must follow these steps:
1. Click the "Safely Remove Hardware icon" icon on the taskbar.
2. Select "USB Mass Storage Device," and then click "
3. If the "Stop a Hardware device" window appears, click "
4. Disconnect the USB cable from the camcorder and PC.
malfunction
transmission will stop and the data may be damaged.
along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the camcorder.
Explorer, open the drive that corresponds to your camcorder, and then run IStudio.exe.
110
"
1/1
"
"
"
PC Software
Off
On
Advertisement
Table of Contents
