Copy Setup; Fax Setup - Samsung SCX-6555NX Series User Manual

COPY SETUP

For copy output, you can set up several options in advance.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK.
3. Press the Setup tab > Copy Setup.
OPTION
Page Number If you select this option On, each copy will include
the page number on the bottom of each page.
Time & Date Set this option On in order to print the date and
time on each copy, set from the General tab.
ID Stamp This option is used to set words or a message to
print on your copies. Set this option On and an
input screen will be displayed, write your message
using the pop up keyboard.
Manual ID Copy This option sets the ID copy settings such as the
number of images or copying positions manually.
Setup
(See "Copying ID with the manual ID copy
option" on page

FAX SETUP

This machine offers you with various options to you for setting up the fax
system. You can change the default settings for your preferences and
needs.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK.
3. Press the Setup tab > Fax Setup.
DESCRIPTION
45.)
The fax options are different from country to country depending on
the international communication regulatory. If the display screen
does not show or gray out some of the fax options explained
herein, it means that the grayed out function does not supported in
your communication environment.
OPTION
Machine ID & Fax Enter the machine ID and fax number which will
be printed at the top of each page. Select the
No
country name. This option usually pre-set for user.
Receive Start Code This feature works best when you are using an
extension telephone connected to the EXT socket
on the back of your machine. You can receive a
fax from someone you are talking to on the
extension telephone, without going to the fax
machine. (See "Receiving faxes manually using
an extension telephone" on page 63.)
Error Correction It helps with poor line quality and makes sure any
faxes you send are properly transmitted to any
Mode
other ECM-equipped fax machines. Sending a fax
using ECM may take more time.
Fax Initial Setup You can set Receive Mode for Telephone, Fax or
Answering Machine/Fax, and Dial Mode at either
Pulse (Dial Pulse) or Tone (Multi Frequency).
When you select Answering Machine/Fax, you
can receive a fax while the line is being used by
the answering machine. (See "Changing the
receive modes" on page 63.)
Contact your local telephone company for Dial
Mode setting information.
Ring to Answer You can specify the number of times the machine
rings before answering an incoming call.
Receive Header Use this option to automatically print the page
number, date and time of fax reception at the
bottom of each page.
Secure Receive You may need to prevent your received faxes from
being accessed by unauthorized people. This
feature restricts printing of received faxes when
the machine is unattended. If you select this
option to On, all incoming faxes go into memory.
A four-digit Passcode is used when you want to
print out received faxes in memory. (See
"Receiving in secure receiving mode" on
page 63.)
Received Fax When receiving a fax containing pages longer
than the paper loaded in the tray, the machine can
Printing
reduce the size of the original to fit the size of the
paper loaded in the machine. If this feature is set
to Off, the machine cannot reduce the original to
fit onto one page. The original will be divided and
printed in actual size on two or more pages. If you
set this option to On and set the discard size to
10mm and the received data is longer then the
currently set paper in the tray, the machine
minuses the data that would have been on the
specified discard segment.
78
DESCRIPTION