Samsung GH68-06997A User Manual page 62

Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Uni-
code if you enter a Uni-code character. Use of
Uni-code encoding will reduce the maximum
number of characters in a message to about half. If
this menu is not shown, your phone provides the
Automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
• Current profile: select a profile.
• Profile settings: set the following properties in a
profile:
Service centre: store or change the number of
your message centre.
Default destination: enter the default
destination. It will be displayed in the first field on
the Recipients field.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS centre while
attempts are made to deliver them.
Setting name: enter a profile name.
Multimedia message
(Menu 5.5.2)
You can configure default MMS settings for sending or
receiving messages.
• Send settings: set up the following options for
sending a multimedia message:
Delivery report: set the network to inform you
when your message has been delivered.
Hide address: set your address to be hidden from
the recipient's phone.
Read reply: determine whether or not the phone
sends a read-reply request.
Priority: set the priority level of your messages.
Expiry date: set the length of time your messages
are stored in the message centre.
Delivery time: set a time delay before messages
are sent.
59