Details Of Mail Transmission Function; Basic Setup; Event Mail Setting; Logging/Trace Mail Setting - Panasonic FP7 User Manual

6.2 Details of Mail Transmission Function

6.2.1 Basic Setup

 SMTP server settings
One SMTP server can be set.
 Destination group setting
Up to eight destination groups can be set.

6.2.2 Event Mail Setting

• By the event mail setting, a mail is sent when a PLC event occurs
• A maximum of sixteen send triggers can be set.
• The following five types of send triggers are available.
Classification
1 Bit
2 Cycle
3 Instruction
4 Time
PLC status
5
change
(Note 1): The trigger (when the power turns on) cannot be specified with an instruction.
• Each setting and transmission is executed with the tool software or instructions.
Item
SMTP server setting
Destination group setting
Mail setting
Execution of transmission

6.2.3 Logging/Trace Mail Setting

• A mail is sent when a file is determined by the logging/trace mail setting.
• The settings are configured with the tool software or instructions, and the transmission is
automatically executed.
Item
SMTP server setting
Destination group setting
Logging/Trace mail setting
Execution of transmission
Description
A mail is sent at the rising of a specified bit device.
A mail is sent with a period of the unit of hour, minute or second.
A mail is sent when SMTPcREQ instruction is executed.
A mail is sent in units of minute, hour, day, week, month or year
A mail is sent when one of the following events occurs; the power is turned on (Note 1) /
An error is cleared / The mode is switched from PROG. to RUN / The operation stop self-
diagnostic error is detected / The operation continue self-diagnostic error is detected.
Setting with tool software
Basic Setup
Basic Setup
Event Mail setting
Trigger specified in the mail setting
Setting with tool software
Basic Setup
Basic Setup
Logging/Trace mail setting
Automatically executed when files
are determined.
6.2 Details of Mail Transmission Function
Setting with instruction
SMTPcSV
SMTPcADD
SMTPcSET
Trigger specified with SMTPcSET
instruction
Setting with instruction
SMTPcSV
SMTPcADD
SMTPcLOG
Automatically executed when files
are determined.
6-3