Bosch Greentherm T9800 SEC 199 Installation And Operating Instructions Manual page 45

▶ Touch the symbol
▶ Use the symbols
When week days are selected,
▶ Touch the symbol
▶ Touch the symbol
Deleting a recirculation program,
▶ Use the symbols
to be deleted.
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
period.
▶ Touch the symbol
▶ Touch the symbol
TL Tank Loading
▶ Touch the symbol
Display shows following menu.
– External NTC
– Internal NTC
– Aquastat
Select the menu according with the installation.
OFF
▶ Touch the symbol
Recirculation will not be active.
A2 Vacations
Set Vacation time.
The burner will not activate while the
appliance is in vacation mode.
▶ Touch the symbol
Display shows Vacation menu.
▶ Use the symbol to choose On.
On starts to blink.
▶ Touch the symbol
MM/DD/YYYY.
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
Greentherm T9800 SE 160/199 | SEC 199
to select the day of the week.
or to choose another week day.
to validate operation.
to exit.
or to select the day of the week
.
or to choose option Delete.
.
or to choose a recirculation
twice to delete recirculation period.
to exit.
.
, to select OFF.
.
to define first day of vacation:
or to set the month.
when month is correct.
or to set the day.
when day is correct.
or to set the year.
when year is correct.
or to define the total of days.
to finish programming.
▶ Touch the symbol
Deactivating the vacation program.
▶ Use the symbol or
Off starts to blink.
▶ Touch the symbol
Off option is selected.
▶ Touch the symbol
A3 Language
Set the language.
A6 Display Position
Set the position:
▶ Touch the symbol
Adjust "Burner status/Error symbol" (Fig. 38, [1])
display position;
• Vertical
• Horizontal
▶ Touch the symbol
Adjust "LCD display" position (Fig. 38, [7]);
• Vertical
• Horizontal
After the display's position has been adjusted:
▶ Touch the symbol
A7 Wireless Connectivity
Only available with Wi-Fi accessory module. See instructions
included with accessory.
A8 Startup Delay
This menu allows programing a burner start delay between 0
and 60 seconds, after detecting water flow.
▶ Access to information / adjustments menu.
Display shows SA Settings.
▶ Use the symbols
▶ Touch the symbol
Display shows Startup Value(s).
▶ Touch the symbol
▶ Touch the symbols
delay to start-up after detection of the water flow.
▶ Touch the symbol
A9 Units Set
This menu allows you to choose the units visible on the display.
▶ Access to information / adjustments menu.
Display shows SA Settings.
▶ Touch the symbol
Operating Instructions | 45
to activate vacation program.
to select "Off"
.
to deactivate vacation program.
,
,
to exit.
or to choose A8 Startup Delay.
.
.
or to define, in seconds, the
after reaching the desired value.
until A9 Units is in the display.
6 720 816 815 (2018/08)