FULL RANGE SPEAKER SYSTEM
CRS-177-W
SERVICE MANUAL
EXTERNAL VIEW
CENTER SPEAKER
Full range
(T07-0187-05)
Grille ass'y
(B06-1479-03)
Model name plate
SPECIFICATIONS
System .....................................................................
Enclosure ........................................................Acoustic Air Suspension...........Acoustic Air Suspension
Loudspeaker ..................................Full Range 10 cm (4") Cone typeX2...........Full Range 10 cm (4") Cone type
Nominal Impedance .........................................................................8Ω ..........8Ω
Maximum Input Power ...............................................................100W...........40W
Rated Input Power ........................................................................50W...........20W
Sensitivity ......................................................................89dB/W at 1m...........88dB/W at 1m
Frequency Response ...............................................70 Hz ~ 20,000 Hz...........80 Hz ~ 20,000 Hz
Dimensions ....................................................Width: 440mm (17-5/16")...........150mm (5-7/8")
........................................................................Height: 150mm
.........................................................................Depth: 162mm
Net Weight .........................................................................3.2kg (7.0lb)...........1.4kg (3.1lb)
Enclosure Finish ...................................................High density particle laminated with P.V.C sheet
Accessories ...........................................................Speaker cord 3m X3
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
Binding head tapping screw
(N44-4012-45)X8
Push terminal
(E29-0920-08)
Center speaker
(5-7/8")...........200mm (7-7/8")
(6-3/8")...........148mm (5-13/16")
2000-6/B51-5650-00 (K)598
REAR SPEAKER
Full range
(T07-0181-05)
Mounting
hardware
(J29-0248-08)
Rear speaker
...........
Binding head
tapping screw
(N44-4012-45)X4
Grille ass'y
(B06-1480-03)
Binding head tapping
screw
(N44-4012-45)X2
Push terminal
(E29-0920-08)
Model name plate