Kenwood CRW-NV701 Service Manual

CENTER SPEAKER ,SURROUND SPEAKER ,SUBWOOFER SYSTEM
CRW-NV701
SERVICE MANUAL
EXTERNAL VIEW :SURROUND SPEAKER
Dressing panel
Grille assy
(A21-3328-08):L
(B06-1475-08):L
(A21-3329-08):R
(B06-1476-08):R
Binding head
tapping screw
(N44-3514-45)x4
Fullrange
(T07-0489-05)
DISASSEMBLY FOR REPAIR
How to remove the speaker unit
1. Remove the front dressing panel ass'y before replace the speaker.(Insert the screw driver into
the gaps of the silver panel from bottom side.)
2. You can disassemble the front dressing panel ass'y if removing the screws from its back side.
SPECIFICATIONS
Enclosure ..........................................................................................Acoustic air suspension type
Full range .............................................................................................100 mm, (4 in) cone type
Impedance ................................................................................................................................6 Ω
Maximum input level............................................................................................................50 W
Dimensions ..................................................................................................W: 177mm (6-15/16")
Net Weight .................................................................................................1.3 kg (2.87 lb / piece)
Note:
KENWOOD follows a policy of continuous advancements in development. For this
reason specifications may be changed without notice.
Dressing panel
(A21-3326-08):L
(A21-3327-08):R
Binding head
tapping screw
(N44-3012-46)x4
For panel assy

2000-6/B51-5643-00 (Z/K)2474
Mounting hardware
(J21-8824-05)
Binding head
tapping screw
(N44-3014-45)x2
Push terminal
(E21-0297-05)
H: 150mm (5-7/8")
D: 166mm (6-9/16")
CRW-NV701