Samsung AW069CB Owner's Instructions Manual page 35

C Type
149CB/AW189CB
Now position the cabinet centrally into the window.
Make sure you have about a five degree tilt backwards for
proper drainage of condensation.
9 Attach the support brackets to the cabinet for adjusting the pitch.
9-1 Select the Type D support bracket position that will place the bracket
near the outermost point on the window sill. In most cabinets this will
be the first set of holes. Using eight Type B screws, attach the
support brackets to each side of the cabinet bottom.
9-2 Thread the Type C bolts into the support brackets, making sure the
cabinet maintains a slightly downward slant to the outside.
Some windows do not have sufficient window ledge on the outside edge of
the window, in such cases the brackets serve no useful purpose.
10 Attach the window sash seal to the window.
10-1 Cut the window sash seal to the window width.
10-2 Remove the backing from the window sash seal and attach it to
the underside of the bottom of the window.
(cont.)
9-1
9-2
10
Window sash seal
Type B
Screws
Type C Bolts
35
E-