Reassembling The Burner - Miele CS 1018 G Operating And Installation Instructions

Reassembling the burner

 Place the burner head  onto the
burner base  so that the ignition
safety device  and the ignitor 
extend through their respective holes.
The lobe  on the burner cap must
fit into the recess  on the burner
head. The lobe  on the burner head
must fit into the recess  on the
burner base.
 Replace the burner ring .
 Then place the burner caps  and 
in position.
Ensure parts are reassembled in the
correct order after cleaning.
Cleaning and care
31