Display; Leds - Siemens FT2011 Operation Manual

PMI
4

Display

4.2 Display

4.3 LEDs

16 | 32
Building Technologies
Fire Safety
The display has two areas:
ABCDE FGHI
1
ABCD: 3
ABCD: 421
ABCDEFGHI AAA/BBB
2
ABCD: 026
ABCDE CCC
Figure 3: Display representation with two indicated messages
1 Header
The LEDs on the ↑Person Machine Interface signal 'Events' and conditions. In
addition, the LEDs support the operator's orientation. The LEDs can light up in red,
yellow, or green. The LEDs can be configured according to customer-specific
requirements.
The LED colors can, for example, signal the following information:
Red ●
●
Yellow ●
●
●
Green ●
Additional information on the conditions of the LEDs (steady on, steady off or
flashing) can be found in the relevant chapter.
ABC: 32
ABC: 75
2 Representation area
ALARM
Activations, e.g., remote transmission,↑ alarm devices,
control function
Fault
Isolation
Deactivation, e.g. remote transmission, alarm devices,
control function
System is in operation
07:55:31
XXX YYY ZZZ
XXX YYY ZZZ
009311_k_en_--
2015-12-15