Troubleshooting/Q&A - Panasonic TY-ER3D4ME Operating Instructions Manual

Troubleshooting/Q&A
please contact the place of purchase.
Cannot register a 3D Eyewear to TV.
Does the TV support on this 3D Eyewear?
Use the 3D Eyewear with compatible TVs. (
Is the TV has been paired with the 3D Eyewear?
Perform the pairing with the TV to see.(
Did you allow more than 30 seconds to elapse after
setting the unit to the device registration mode?
The pair setting is automatically released if you allow more than 30
seconds to elapse. Set the pairing with the television and connected
3D Eyeware placed as close to each other as possible.
Images are not 3D.
Is the 3D Eyewear mode set to 3D?
Slide the tab once to the Mode position to change the mode
between 3D and 2D.
Are the image settings switched to 3D images?
Refer the television operating instructions.
Individual differences may occur in which the
especially in users that have a different level of
eyesight between the left and right eyes.
Take the necessary steps (wearing glasses etc.) to correct your
eyesight before use.
The power of the 3D Eyewear turns off by itself.
Are there any objects between the eyewear and
television?
The indicator lamp does not light when the power
switch is set to "ON".
If the indicator lamp does not light at all, the battery is completely
page 2)
page 8 - 9)
13