Handling Bucket With Hook; Checking For Damage To Bucket With Hook; Prohibited Operations; Precautions During Operations - Komatsu PW160-7H Operation & Maintenance Manual

OPTIONS, ATTACHMENTS

HANDLING BUCKET WITH HOOK

CHECKING FOR DAMAGE TO BUCKET WITH HOOK

Check that there is no damage to the hook, stopper, or hook
mount. If any abnormality is found, please contract your Komatsu
distributor.

PROHIBITED OPERATIONS

The standard work equipment must not be used for lifting loads. If
this machine is to be used for lifting loads, it is necessary to install
the special bucket with hook.

PRECAUTIONS DURING OPERATIONS

When carrying out lifting operations, reduce the engine speed
●
and use the lifting operation mode.
Depending on the posture of the work equipment, there is
●
danger that the wire or load may slip off the hook. Always be
careful to maintain the correct hook angle to prevent this from
happening.
Never steer the machine while lifting a load.
●
If the bucket with hook is turned and used for operations, it
●
will hit the arm during dumping operations, so be careful
when using it.
The loads must never exceed those specified in the lifting
●
capacity chart when carrying out lifting operations.
If you wish to install a hook in the future, please contact your
●
Komatsu distributor.
PW160-7H VEAM390100
HANDLING BUCKET WITH HOOK
CORRECT
INCORRECT
AL069260A
AL069270A
315