Download Print this page
Samson XM 410 Specification
Samson XM 410 Specification

Samson XM 410 Specification

6 channel 400w powered mixer
Hide thumbs Also See for XM 410:

Advertisement

Quick Links

PRO
PRODUCT
XM 410
SERIES
XM
TYPE:
POWERED
MIXERS
DESCRIPTION
6 CHANNEL 400W POWERED MIXER
CATEGORY
POWERED MIXERS
GENERAL DESCRIPTION
The XM410 is a six channel, 400 Watt powered mixer with
built-in 24 BIT DSP (Digital Signal Processor) effects. The
XM410 will give you clean, clear sound reproduction thanks
to the high quality, low noise microphone preamps, super
clean mix bus, on-board 7-band graphic equalizer and the
high output/low distortion power amplifier. For studio quality
processing, you can add one of the 100 dazzling digital
effects including Delays, Chorus and lush Reverbs to your
voice or instruments. The XM410's ingenious Kickback
enclosure allows you to tilt the unit back to see, and
operate, the controls with ease. The unit is easy to transport
with its compact size and oversized, sure-grip handle.
The super-tough ABS construction ensures reliable, high
quality sound from venue-to-venue and performance-to-
performance day in, and night out. Optimized for live sound
reinforcement and commercial installations, the XM410 is
an ideal mixer and power amp solution offering big sound in
a compact package.
FRONT PANEL
FEATURES
Six channel powered mixer in an ergonomically correct
>
kickback enclosure allowing you to easily see and operate
the front panel functions.
>
Six Mic / Line inputs with 1/4-inch phone and
XLR connectors.
>
2 x 200 Watts, or 200 Watt Main / 200 Watt Monitor, or
400 Watts Bridged power operating modes.
A built-in, 24-bit DSP (Digital Signal Processor) with 100
>
selectable presets including Reverb, Delay and Chorus,
offers dazzling studio quality effects.
>
Dynamic or condenser microphones connect easily to the low
noise mic pre-amps with available 36 Volt Phantom Power.
>
The 3-Band EQ on each channel enables you to tailor the
tonal response for each input.
Two Auxiliary sends on each channel for building an
>
BACK PANEL
independent mix to send to the DSP effects and monitors.
7-band Graphic Equalizer for the Main mix, allowing the
>
system to be set-up for maximum gain before feedback.
A convenient Tape / CD Input is provided so you connect a
>
stereo device for accompaniment or background music.
continues»
©2006 Samson v1.0 5/06

Advertisement

loading

Summary of Contents for Samson XM 410

  • Page 1 7-band Graphic Equalizer for the Main mix, allowing the > system to be set-up for maximum gain before feedback. A convenient Tape / CD Input is provided so you connect a > stereo device for accompaniment or background music. continues» ©2006 Samson v1.0 5/06...
  • Page 2 348mm SIDE ARCHITECT’S & ENGINEER’S SPECIFICATIONS The Samson XM410 shall be a 6 channel powered mixer. There shall be 6 mic/line channels each with 3 bands of EQ. Each channel shall have 2 aux sends, 1 to the monitor output and 1 to the DSP. The DSP shall have 99 programs of digital effects with a level control to send the DSP signal to the main bus.