Important Notice - Melitta MESC10 Use & Care Manual

We recommend you clean your coffeemaker once a month with a
solution of vinegar and water. Mineral deposits from tap water can
form a coating in the coffeemaker, causing slower brewing time
and possibly an off flavor in the coffee.
1. Pour 1 ⁄ cup vinegar into the carafe, and add cold water up to
2
the 4 cup mark. Pour into the water chamber.
2. Use a clean paper filter in the filter to collect mineral deposits
and close lid.
3. Follow brewing instructions (without coffee).
4. When the unit has finished brewing, turn coffeemaker off.
Carefully remove the carafe and place on a heat resistant
surface. Wait 15 minutes and pour the solution back into the
coffeemaker.
5. Turn unit on again. Allow solution to empty into carafe; turn
unit off. After dripping stops, discard solution.
6. Allow coffeemaker to cool 10 minutes. Rinse it out by brewing
a full carafe of cold water (without coffee). Repeat process
with fresh water.
7. At the end of the cycle, turn unit off. Discard the water and
paper filter.
8. Wash and dry all removable parts.
9. When coffeemaker has cooled, wipe exterior with a damp
cloth.
Any servicing requiring disassembly other than the above
cleaning must be performed by an authorized service center.
Please call our Customer Service Department for assistance.
800-233-9054
Descaling

IMPORTANT NOTICE

If any parts are missing or defective,
DO NOT return this product.
Monday - Friday 9:00 am - 5:00 pm CST
7
Thank You