Table of Contents
Advertisement
CD OPERATION
1. Press POWER Button to turn unit ON.
2. Press the CD Button to select CD Mode. Press the
OPEN/CLOSE Button to open the CD Door; insert a CD disc by
gently pressing on the center part of the disc, so that it locks into
place. With the label side facing forward, close the CD Door.
3. Press PLAY/PAUSE
first track number and play time will appear on the LCD Display
and the CD will begin to play.
NOTE: If there is no disc in the CD Compartment and CD
select Button is pressed. The LCD will show "No disc."
4. Press PLAY/PAUSE
temporarily. The LCD Display will show the following:
During PAUSE, the PLAY and playing time will flash. Press it
again to resume playback.
5. Press and release the SKIP
Button to skip forward or backward to the desired track.
NOTE: If batteries are low, it may still play Radio but not CD
Player and Display may show:
Try replacing with fresh, new batteries.
lI Button. The LCD Display will show the
lI Button again to PAUSE playback
l (Forward) or l
7
(Backward)
Advertisement
Table of Contents
