Clock Setting; Timer Operation - Salton Wet Tunes WT51PL Owner's Manual

POWER ON
When battery is connected for the first time or battery has been reinstalled:
1. The LCD Display shows the following:
2. Power ON Button is pressed on, the
unit defaults to TUNER Function, FM band.
Afterward when the Power ON is pressed on, the previously
chosen function will be displayed.

CLOCK SETTING

1. Press MODE Button, to display Clock.
2. Press MEMORY Button, HOUR digit will flash.
Press [ l] Forward / [l
the Clock, watching for "AM" or "PM."
3. Press MEMORY Button again, MINUTE digit will flash.
Press [ l] / [l
4. Press MEMORY Button once more, flashing stops and the
time is set.
NOTE: If Button is not pressed for several seconds, this mode
is released automatically.

TIMER OPERATION

The Timer Function allows you to program the Radio to automatically
turn on/off at a set time.
Timer Setting:
1. Press MODE Button to display the Clock.
2. Press MODE Button again, to set the TIMER ON Indicator flashing,
then press the MEMORY Button until the HOUR digit flashes.
Press [ l] / [l
Press the MEMORY Button again, and the MINUTE digit will flash.
Press the [
will be the time the CD/Radio will turn on.
] Backward Button to set the hour on
AM
PM
] Button to set the minute.
AM
PM
] Button to select the desired hour.
l] / [l ] Button to select the desired minute. This
4