Nail Selection; Accessories; Standard Accessories; Optional Accessories - Hitachi NP 35A Instruction And Safety Manual

English

NAIL SELECTION

● Be sure to use only the genuine HITACHI
nails for the NP35A. The use of any other
nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with
this Nailer.
23 Gauge pin nails
Min.
.024"
(0.6 mm)

ACCESSORIES

● Accessories other than those shown below
can lead to malfunction and resulting
injuries.

STANDARD ACCESSORIES

1
2
10
WARNING
Max.
.024"
(0.6 mm)
WARNING
4
3
1 Eye protection
2 Allen wrench for M4 screw
3 Nose cap (A)
4 Case
5 Lubricant oiler
OPTIONAL ACCESSORIES ... sold separately
○ Pneumatic tool lubricant
1 oz. (30 cc) oil feeder (Code No. 877153)
4 oz. (120 cc) oil feeder (Code No. 874042)
1 quart (1 ltr) can (Code No. 876212)
NOTE
Accessories are subject to change without any
obligation on the part of HITACHI.

APPLICATIONS

○ Installation of decorated plywood such as baseboards
and edgings in interiors of buildings.

BEFORE OPERATION

Read section titled "SAFETY" (pages 4 – 8).
Make sure of the followings before operation.

WORKING ENVIRONMENT

● No fl ammable gas, liquid or other fl ammable
objects at worksite.
● Clear the area of children or unauthorized
personnel.

AIR SUPPLY

● Never connect Nailer to pressure which
5
potentially exceeds 200 psi (13.7 bar 14
kgf/cm ) if a regulator fails.
2
● Never use non relieving coupler on Nailer.
1
1
2
1
1
WARNING
DANGER
● NEVER use reactive
gases or
bottled gases.
Explosion may occur.
WARNING
other