What To Do When - Janome DE 5024 Servicing Manual

CONDITION
1. SKIPPING 1. NEEDLE IS NOT INSERTED
STITCHES PROPERLY.
2. NEEDLE IS BENT OR WORN.
3. INCORRECTLY THREADED.
4. NEEDLE OR THREAD ARE
INAPPROPRIATE FOR
FABRIC BEING SEWN.
5. SEWING ON STRETCH
FABRIC.
6. INAPPROPRIATE NEEDLE
BAR HEIGHT.
7. INAPPROPRIATE NEEDLE
TO HOOK TIMING.
8. INAPPROPRIATE NEEDLE
TO HOOK CLEARANCE.
2. FABRIC NOT 1. INCORRECT FEED DOG
MOVING HEIGHT.
2. THREAD ON BOTTOM SIDE
OF FABRIC IS JAMMED UP.
3. FEED DOG TEETH ARE
WORN.

WHAT TO DO WHEN

CAUSE
1
HOW TO FIX
INSERT THE NEEDLE PROPERLY.
CHANGE THE NEEDLE.
RETHREAD.
USE THE RECOMMENDED
SEWING NEEDLE AND THREAD.
USE A SIZE 11 BLUE TIP NEEDLE.
SEE MECHANICAL
ADJUSTMENT
"NEEDLE BAR HEIGHT".
SEE MECHANICAL
ADJUSTMENT "NEEDLE
TO ROTARY HOOK TIMING".
SEE MECHANICAL
ADJUSTMENT "NEEDLE
CLEARANCE TO ROTARY
HOOK".
SEE MECHANICAL
ADJUSTMENT "FEED DOG
HEIGHT".
MAKE SURE TO BRING
BOTH NEEDLE AND BOBBIN
THREAD UNDER THE FOOT
WHEN STARTING SEWING.
CHANGE THE FEED DOG.
REFERENCE
P.17
P.18
P.15
P.19