Troubleshooting - Sagem ITD 58 User Manual

7. USING YOUR SET TOP BOX

7-14 TROUBLESHOOTING

Error Code
1, 2 or 3 flashes
4, 5 or 6 flashes
7 or 8 flashes
9, 10, 11 or 12
flashes
14, 15, 16 or 17
flashes
The remote control has no effect on the Set Top Box
The red front panel LED remains on
A black screen or an error message is displayed
Bad reception with a portable antenna
Origin of Error
Reception error
Flow validity errors
Local errors
Various errors
Defective Set Top Box Contact your retailer for replacement.
Acknowledge the message by pressing any key on the
remote control. If necessary, repeat your request.
Acknowledge the message by pressing any key on the
remote control. If necessary, repeat your request.
Acknowledge the message by pressing any key on the
remote control. If necessary, repeat your request.
Acknowledge the message by pressing any key on the
remote control. If necessary, repeat your request.
Point the remote control towards the terminal.
Check the state and polarity of the batteries.
Switch terminal from standby to on
Perform a new auto tune.
Move the antenna away from the Set Top Box.
- 22 -
User Action
.