Power System Data 1 - Siemens SIPROTEC 4 7VK61 Manual

No. Information
68 Clock SyncError
69 DayLightSavTime
70 Settings Calc.
71 Settings Check
72 Level-2 change
73 Local change
110 Event Lost
113 Flag Lost
125 Chatter ON
126 ProtON/OFF
127 AR ON/OFF
140 Error Sum Alarm
144 Error 5V
160 Alarm Sum Event
177 Fail Battery
181 Error A/D-conv.
183 Error Board 1
184 Error Board 2
185 Error Board 3
186 Error Board 4
187 Error Board 5
188 Error Board 6
189 Error Board 7
190 Error Board 0
191 Error Offset
192 Error1A/5Awrong
193 Alarm adjustm.
194 Error neutralCT
320 Warn Mem. Data
321 Warn Mem. Para.
322 Warn Mem. Oper.
323 Warn Mem. New

Power System Data 1

2.1.3
The device requires some plant and power system data in order to be able to adapt its functions accordingly,
depending on the actual application. The data required include for instance rated data of the substation and
the measuring transformers, polarity and connection of the measured quantities, if necessary features of the
circuit breakers, and others. Furthermore, there are several function parameters associated with several func-
tions rather than one specific protection, control or monitoring function. The Power System Data 1 can only be
changed from a PC running DIGSI and are discussed in this section.
SIPROTEC 4, 7VK61, Manual
C53000-G1176-C159-5, Edition 05.2018
Type of Comments
Informa-
tion
OUT Clock Synchronization Error
OUT Daylight Saving Time
OUT Setting calculation is running
OUT Settings Check
OUT Level-2 change
OUT Local setting change
OUT_Ev Event lost
OUT Flag Lost
OUT Chatter ON
IntSP Protection ON/OFF (via system port)
IntSP Auto Reclose ON/OFF (via system port)
OUT Error with a summary alarm
OUT Error 5V
OUT Alarm Summary Event
OUT Failure: Battery empty
OUT Error: A/D converter
OUT Error Board 1
OUT Error Board 2
OUT Error Board 3
OUT Error Board 4
OUT Error Board 5
OUT Error Board 6
OUT Error Board 7
OUT Error Board 0
OUT Error: Offset
OUT Error:1A/5Ajumper different from setting
OUT Alarm: Analog input adjustment invalid
OUT Error: Neutral CT different from MLFB
OUT Warn: Limit of Memory Data exceeded
OUT Warn: Limit of Memory Parameter exceeded
OUT Warn: Limit of Memory Operation exceeded
OUT Warn: Limit of Memory New exceeded
Functions
2.1 General
31