Suggested Uses; Care & Maintenance - Ninja Single Serve System Pulse BL100 Owner's Manual

Suggested Uses

FUNCTION
Mincing
Blending
Grating
Ice Crushing
Complete Juicing
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting or
removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base and gear shaft with a damp
cloth and wipe dry.
3 Place the single serve cups in the dishwasher. Place
the lids on the top rack. Use caution when
handling the single serve blade assembly as
the blades are very sharp.
NOTE: You may also wash the containers by filling
the single serve cup with no more than 10-oz. of
warm water and a drop of dish washing detergent,
placing the single serve blade on the single serve cup
and pulsing a few times. Do not fill the single serve
cup with more than 10-oz. of water because it will
overflow. Once clean, remove the single serve cup
from the motor base. Rinse the single serve cup and
single serve blade under running water. Allow all the
parts to dry before storing.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
10 TOLL FREE:
CONTAINER ATTACHMENT
Single Serve Single Serve Blade
Single Serve Single Serve Blade
Single Serve Single Serve Blade
Single Serve Single Serve Blade
Single Serve Single Serve Blade
1-877-646-5288
TYPE OF FOOD
Onion
Garlic
Herbs
Smoothies
Milkshakes
Frozen Drinks
Dips
Spreads
Cheese
Bread Crumbs
Ice
Slushies
Snow Cones
Fruit & Vegetable Drinks
HOW TO STORE
1 Store the Ninja Single Serve System Pulse™.
®
upright with the single serve cup and single serve
blade. Secure the power cord underneath the base
by wrapping the cord around the cord wrap. Do not
place anything on top. Store the single serve cup and
lids along side the appliance where they will not be
damaged and won't cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja Single Serve System Pulse™ features a
®
unique safety system which prevents damage to the unit's
motor and drive system should you inadvertently overload
your appliance. If the appliance is being overloaded,
the motor will stop. To reset the appliance, follow the
resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3
Allow the appliance to cool for approximately 30
minutes.
4
Re-install the single serve cup onto the base and re-
plug the appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure
not to exceed the recommended maximum capacities.