Memory Function - ADC Adtemp 429 User Manual

6.Memory Function

The unit retains the last 30 readings.
To recall previous readings:
1. Press the Measure button to power the unit on.
2. Briefly press and release the Memory button then press again to display
the last measurement accompanied by the
Note: The Human or Object symbols will be displayed to indicate the
measurement mode that was in use for the displayed reading in memory.
3. Each press of the Memory button will display a previous measurement
(up to 30).
To delete readings from memory:
1. Press the Measure button to power the unit on.
2. Press and hold the Memory Button for at least 3 seconds
to delete all the readings.
3. The LCD displays "--" and the device beeps to confirm
all the memories are cleared.
Note: Once 30 measurements are in memory each new measurement will
overwrite the oldest.
Note: All the readings (Human and Object) will be cleared when deleting
readings from memory.
symbol.