Simplex Connectors And Connector Adapter; Order Numbers - Fiber-Optic Cables - Siemens S7-400 Installation Manual

Order Numbers
You can order the fiber-optic cables specified in Table 5-4 as follows.
Table 5-5

Order Numbers - Fiber-Optic Cables

Fiber-Optic Cables
SIMATIC NET PROFIBUS plastic fiber-optic,
duplex conductor
I-VY2P 980/1000 150A
Plastic fiber-optic cable with 2 conductors and a PVC sheath,
without connectors,
for use in environments with low mechanical stress (e.g. in a
cabinet or for test assemblies in the laboratory)
SIMATIC NET PROFIBUS plastic fiber-optic, standard cable
I-VY4Y2P 980/1000 160A
Robust round cable with 2 plastic fiber-optic cable conductors,
PVC outer sheath and PA inner sheath, without connectors,
for use indoors
SIMATIC NET PROFIBUS PCF fiber-optic, standard cable
I-VY2K 200/230 10A17 + 8B20
PCF fiber-optic cable with 2 conductors, PVC outer sheath, fitted
with 4 Simplex connectors, whip length 30 cm each, for distances
up to 300 m
(Other lengths on request)
5.8.2

Simplex Connectors and Connector Adapter

Definition
Simplex connectors allow you to connect the fiber-optic cable to the integrated
fiber-optic cable interface on the PROFIBUS device. In some Siemens modules
(e.g. IM 153-2 FO, IM 467 FO) two Simplex connectors (one for the sender and
one for the receiver) are inserted in the module by means of a special connector
adapter.
Prerequisite
The PROFIBUS device must be equipped with a fiber-optic cable interface, such as
the ET 200M (IM153-2 FO) or the IM 467 FO for S7-400.
S7-400 and M7-400 Programmable Controllers Hardware and Installation
A5E00069481-04
Networking
Form Order Number
50 m ring 6XV1821-2AN50
per meter 6XV1821-0AH10
50 m ring 6XV1821-0AN50
100 m ring 6XV1821-0AT10
50 m 6XV1821-1CN50
75 m 6XV1821-1CN75
100 m 6XV1821-1CT10
150 m 6XV1821-1CT15
200 m 6XV1821-1CT20
250 m 6XV1821-1CT25
300 m 6XV1821-1CT30
5-29