Table of Contents
Advertisement
Quick Links
Your stapler has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
18 VOLT STAPLER
P301
BATTERIES AND CHARGERS
SOLD SEPARATELY
Advertisement
Table of Contents
Related Manuals for Ryobi P301
Summary of Contents for Ryobi P301
- Page 1 To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE OPERATOR’S MANUAL 18 VOLT STAPLER P301 BATTERIES AND CHARGERS SOLD SEPARATELY...
-
Page 2: Table Of Contents
WHAT THIS WARRANTY COVERS: This warranty covers all defects in workmanship or materials in your RYOBI tool for a period of two years from the date of purchase. With the exception of batteries, power tool accessories are warranted for ninety (90) days. -
Page 3: General Safety Rules
Use of any other batteries may create a risk of fire. Use battery only with charger listed. MODEL BATTERY PACK (P100) CHARGER (P110) P301 130255004 or 130224028 PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. -
Page 4: Specific Safety Rules
SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. -
Page 5: Safety Rules For Charger
SAFETY RULES FOR CHARGER WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage. -
Page 6: Symbols
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes Alternating Current Direct Current No Load Speed... -
Page 7: Symbols
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand com- pletely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service for assistance. -
Page 8: Features
PRODUCT SPECIFICATIONS Motor ...18 Volt DC Switch ... Single Shot Trigger Magazine Capacity ... 84 staple Staple Speed ...40 shots/min. DEPTH ADJUSTMENT KNOB ACTIVATION FOOT KNOW YOUR STAPLER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. -
Page 9: Assembly
UNPACKING This product has been shipped completely assembled. Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. - Page 10 LED FUNCTIONS OF CHARGER LED WILL BE ON TO INDICATE STATUS OF CHARGER AND BATTERY PACK: Red LED on = Fast charging mode. Green LED on = Fully charged and in maintenance charge mode. Green LED on = When battery pack is inserted into charger, indicates hot battery pack or that battery pack is out of normal temperature range.
- Page 11 NOTE: This situation only occurs when continuous use of the tool causes the batteries to become hot. It does not occur under normal circumstances. Refer to CHARGING A COOL BATTERY PACK for normal recharging of batteries. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Authorized Service Center for electrical check.
- Page 12 SETTING DEPTH See Figure 6. The depth adjustment knob increases or decreases the force with which a staple is driven into the workpiece. Rotate the depth adjustment knob clockwise to increase the force. Rotate depth adjustment knob counterclockwise to decrease the force.
-
Page 13: Maintenance
WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask. WARNING: To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing... -
Page 14: Parts Ordering / Service
• HOW TO ORDER REPAIR PARTS When ordering repair parts, always give the following information: • MODEL NUMBER • SERIAL NUMBER Ryobi is a registered trademark of Ryobi Limited used under license. ® 983000-955 06-12-07 (REV:03) OPERATOR’S MANUAL 18 VOLT STAPLER...