Advertisement
1. Making and receiving calls
Option
and selecting
Switch
Calls.
Option.
u
/
d
Then follow the procedures below.
1.1 Making and receiving calls
2. Contacts and the calls lists
When making calls you can pre set
3.1 Attached handset
2.1 Contacts
the line selection to auto, manual or
If you have several telephone
The handset gives you access to 2
individual line selection. The default
numbers, you can specify which
contact lists:
setting is auto, when a call is made
handsets will ring when incoming
the router will automatically select
Local contacts - The contacts are
calls are made to different numbers.
the line.
saved locally on the handset.
d
>
Attached Handset
There are two main ways to make
Base contacts - The contacts are
a call.
to the required handset, t or u to
saved on the router. All the handsets
t
check / uncheck the handset > Save.
t
registered to the router can access
You can dial the number first and
these shared contacts.
then press
. Or you can press
3.2 Multi call mode
and then dial the number.
To dial a contact, press Menu,
Contacts
You can set the line to single call or
O
is displayed, press Select. Scroll
u
To end the call, press
, or if auto
multiple call mode. When in multiple
d
hang up is set to on, place the
or
to select the desired contact
call mode two handsets registered to
handset back on the charger.
t
list and press Select. Scroll
u
or
d
the CAT-iq router can make calls on
t
to the entry you want or search
the same line at the same time.
Press
to answer the call.
alphabetically. Press
to dial.
d
>
Multi Call Mode
1.2 Making a second external call
2.2 Call lists
Single
/
Multiple
While on a call you can make a
Missed, received, outgoing and
second external call:
3.3 Intrusion call
accepted calls are all stored in the call
Press
Option
and scroll
d
to
Add
Call,
When intrusion call is set to allowed,
lists. You can also view all calls.
when a call is in progress a second
press Select.
When you have new missed calls
handset can join the call without
You can either:
(incoming calls that you haven't
being invited, creating a 3-way call.
Dial the number manually.
answered), the display shows
Intrusion call will only be available if
B
Press
to dial a number in the
X Missed Call(s)
and
flashes on the
multi call mode is set to Single.
contact list.
display.
Press
d
to dial a number in the call
d
>
Intrusion Call
To dial a number from the call lists,
lists.
Allowed
/
Allowed
d
u
d
press
, scroll
/
to highlight
Then press
Dial
to dial.
the call list you want. Press Select,
3.4 Permanent CLIR
Once the second call is answered
the most recent number (or name
If set to activate it enables the caller
you can hold a conversation.
if stored in the contact list) is
to prevent their telephone number
t
displayed. Scroll
u
or
d
to the entry
You can switch back to the first call
from being sent to the recipient
you want to dial. Press
to dial.
by pressing
Option
and selecting
when a call is made.
Switch
Calls.
d
3. Line settings
>
Permanent CLIR
1.3 Receiving a second call (call
activate
Activate
/
waiting)
The availability of line setting
3.5 Call forward
When on an internal or external call
features are dependent on the
You can redirect your incoming
you can receive a second internal or
CAT-iq router that is being used and
calls to another landline or mobile
external call without ending the first
the services the network provides.
number. Several options are available.
call. When there is a second call the
If available and you have more than
You can also permanently redirect
call waiting screen will be displayed,
one phone line, you can manage your
your calls.
you can either press
Accept
to accept
lines on an individual basis according
the second call and put your first
The call forwarding information is
to your requirements.
router dependent.
caller on hold or
Reject
to reject the
To change any line settings:
second call.
d
>
Call Forward
Firstly -
Menu
>
Advance Settings
> Select.
Once the second call is accepted you
u
d
/
>
C.F.
Unconditional,
d
>
Line Settings
> Select. Enter the
can hold a conversation. You can then
u
d
or
C.F. Busy
> Select.
PIN > Ok.
/
to the required line >
switch between the call by pressing
d
4. Help
to the required feature.
C.F. Unconditional
- t or u >
On
/Off.
>
C.F.
Number, enter the number > Save.
Important
C.F. No Answer
- t or u >
On
/ Off.
Please ensure that your router has
d
to
C.F.
Number, enter the number
the latest software update installed
> Save.
before registering a new handset.
C.F. Busy
- t or u >
On
/ Off.
Registering a handset to a FRITZ!Box
d
C.F.
Number, enter the number >
>
requires FritzOS 6.80 or later
Save.
installed on the FRITZ!Box before
> Select.
u
/
d
registering the handset. Refer to
the router or FRITZ!Box manual for
details of how to perform a check
and install the latest software if
required.
No dial tone
• Check you have a valid SIP
account set up and the
service has been activated.
• Check with your provider for
> Select.
u
/
d
>
network issues.
> Select.
• Check your internet is
working.
• Check that the routers mains
power is connected.
No display
• Check that the batteries
are inserted correctly and
> Select.
u
/
d
>
Not
fully charged. Use only
approved rechargeable
> Select.
batteries supplied.
• Check that the handset is
switched on.
• Reset the handset by
removing the batteries and
disconnecting the router's
u
d
> Select.
/
>
De-
mains power. Wait for around
> Select.
15 seconds before connecting
it again. Allow up to one
minute for the handset and
router to synchronize.
LCD and key backlight does not
light up during operation
• Battery charge is low. Fully
charge the batteries.
> Option.
C.F. No Answer
Signal icon is not white
4. General information
• Handset is out of range. Move
Important safety instructions.
closer to the router.
•
Follow these safety precautions when using your phone to reduce the risk of fire, electric shock, and injury to
persons or property:
• Check that the router's mains
•
Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a
radiator. Ensure that proper ventilation is provided at the installation site.
power is connected properly.
•
Do not use while wet or while standing in water.
Keypad does not seem to work
•
Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool).
•
Do not allow anything to rest on the power cord. Place the power cord so that it will not be walked on.
• Check that the keypad lock
•
Never insert objects of any kind into the product vents as that may result in fire or electric shock.
is not on.
•
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
Battery icon is not scrolling
•
Do not disassemble this product. If service or repair work is required, contact the customer service helpline
during charge
found in this user's Guide.
•
Do not overload wall outlets and extension cords.
• Clean the charging contacts
•
Avoid using during an electrical storm. Use a surge protector to protect the equipment.
with a cloth moistened
•
Do not use this phone to report a gas leak, especially if you are in the vicinity of the gas line.
with alcohol.
To reduce the risk of fire, use only the supplied power adaptor.
• Check that the charger
Unplug this phone immediately from an outlet if:
power is connected properly.
•
The power cord or plug is damaged or frayed.
•
Liquid has been spilled on the product.
• The battery is full. The
•
The product has been exposed to rain or water. Do not retrieve the charger until after you have unplugged the
battery icon will appear
power the wall. Then retrieve the unit by the unplugged cords.
steady on the display.
•
The product has been dropped or the cabinet has been damaged.
•
The product exhibits a distinct change in performance.
No Caller Display
Installation Guidelines
• Check with your
•
Read and understand all instructions and save them for future reference.
internet provider.
•
Follow all warnings and instructions marked on the product.
•
Do not install this product near a bath tub, sink, or shower.
• The caller may have withheld
•
Operate this phone using only the power source that is indicated on the marking label. If you are unsure of the
their number.
power supply to your home, consult with your dealer or local power company.
•
Do not place this product on an unstable cart, stand, or table. This product may fall, causing serious damage
Caller Display doesn't show the
to the product.
name of the caller
•
Adjust only those controls that are covered by the operating instructions. Improper adjustment of other
controls may result in damage and will often require extensive work to restore the product to normal operation.
• The record cannot be found
•
Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents to clean this phone.
in the contact list.
•
Use only the power supply that came with this unit. Using other power supplies may damage the unit.
•
To avoid interference to nearby appliances, do not place the charger of the phone on or near a TV, microwave
• Check that the correct name/
oven, or VCR.
number is stored in the
Battery Safety Instructions
•
Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be
contact list, with the full
released, resulting in injury.
area code.
Important
There is a risk of explosion if you replace the battery with an incorrect battery type. Use only the batteries that came
Cannot register a handset to
with your phone or an authorized replacement recommended by the manufacturer.
the router
•
Keep batteries out of the reach of children.
•
Remove batteries if storing over 30 days.
• The number of handsets
•
Do not dispose of batteries in fire, which could result in explosion.
that can be registered is
•
The rechargeable batteries that power this product must be disposed of properly and may need to be recycled.
Refer to your battery's label for battery type. Contact your local recycling center for proper disposal methods.
dependent on the router.
SAVE THESE INSTRUCTIONS
Check that correct PIN code
Cleaning
(default is dependent on the
•
Clean the phone with a damp (not wet) cloth, or an anti-static wipe.
router) has been entered.
•
Never use household polish as this will damage the product. Never use a dry cloth as this may cause static
shock.
Handset does not ring
Environmental
• The handset ringer volume
•
Do not expose to direct sunlight.
•
The phone may become warm when the batteries are being charged or during prolonged periods of use. This is
may be set to Off.
normal. However, we recommend that to avoid damage, do not place the product on antique / veneered wood.
•
Do not place your product on carpets or other surfaces which generate fibres, or place it in locations preventing
• Check the handset is saved
the free flow of air over its surfaces.
as an attached handset for
•
Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as
bathrooms.
the line being called.
•
Do not expose your product to fire, explosives or other hazardous conditions.
You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a MZGW
Authorized Repair Center.
•
There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you
unplug the power cord during an electrical storm.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which
includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed
Product disposal instructions
warranty card showing the serial number of the Product; (d) a written description of the problem; and, most
Product disposal instructions for residential users
importantly; (e) your address and telephone number.
When you have no further use for it, please remove any batteries and dispose of them and the product according to
The product operates in the frequency range of 1881.792 to 1897.334 MHz and the RF transmission power is 250mW
your local authority's recycling processes. For more information, please contact your local authority or the retailer
(Max.)
where the product was purchased.
Power adaptor for the charger: Model no.: S004AGV0750030N, Manufacturer: Ten Pao or Model no.: MN-A703-E145,
Product disposal instructions for business users
Manufacturer: MEIC.
Business users should contact their suppliers and check the terms and conditions of the purchase contract and
RE Directive
ensure that this product is not mixed with other commercial waste for disposal.
The equipment complies with the essential requirements for the Radio Equipment Directive 2014/53/EU.
Consumer Products and Accessories Warranty
This Extended Quick Start Guide provides all the information you need to get you started. If you need more detailed
Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei
instructions, please refer to the full user guide available online.
Electronics Co. LTD., Unit 1201-05, 12/F., China Resources Building, 26 Harbour Road, Wanchai, Hong Kong. ("MZGW")
Alternatively, contact Customer Services on: 062 889 80 90.
What Does this Warranty Cover?
Competec Service AG
Hintermättlistrasse 3
Subject to the exclusions contained below, MZGW warrants that this Motorola branded product ("Product") or
CH 5506 Mägenwil
certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in
www.competec.ch
materials and workmanship under normal consumer usage for the period outlined below. This Limited Warranty is
your exclusive warranty and is
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product.
not transferable.
MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other trademarks are the property of their respective owners. © 2018 Motorola
Who is covered?
Mobility LLC. All rights reserved.
This warranty extends only to the first consumer purchaser, and is not transferable.
Version 10 (EN_CH)
What will MZGW do?
MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or
replace any Products or Accessories that do not conform to this limited warranty. We may use functionally equivalent
reconditioned / refurbished / pre-owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR MZGW BE LIABLE, WHETHER
IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE
OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
We,
Meizhou Guowei Electronics Co., Ltd. declare under our sole responsibility that the
DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
following products:
PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives
Brand name:
you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
Type:
Descriptions:
Products Covered
Length of Coverage
to which this declaration related is in conformity with the essential requirements of the following
Consumer Products
Two (2) years from the date of the products original
purchase by the first consumer purchaser of the product.
directives of the Council of the European Communities:
Consumer Accessories (battery and power
Ninety (90) days from the date of the accessories original
supply(s))
purchase by the first consumer purchaser of the product.
Consumer Products and Accessories that are
The balance of the original warranty or for ninety (90)
Repaired or Replaced
days from the date returned to the consumer, whichever
is longer.
Exclusions
The products are compliant with the following standards:
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are
excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak
are covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b)
contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food;
(c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of Motorola or MZGW are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-
For and on behalf of Meizhou Guowei Electronics Co., Ltd.
Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone other than Motorola, MZGW or its authorized service
centers, are excluded from coverage.
Signature:
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered
Printed name & Position:
or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication
service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call: 062 889 80 90.
EU Declaration of Conformity
Motorola
CD1HD
CAT-iq Cordless Handset Phone
-
Radio Equipment Directive (2014/53/EU)
-
Ecodesign Directive (2009/125/EC)
Safety:
EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EMC:
EN301489-1 v2.1.1 and EN301489-6 v2.1.1
RF Spectrum: EN301406 v2.2.2
Ecodesign:
EC No 278/2009, 6 April 2009
______________________
Jack Luo –Chief Technical Officer
Date:
23 JAN 2018
Place:
AD1 section, The economy exploitation area, Meizhou,
Guangdong, P.R.China
Advertisement
