Motorola CD1HD Extended Quick Start Manual

What's in the box
Motorola CD1HD
HD Voice Cordless
Handset for Routers
CD1HD
handset
Getting started
The CD1HD handset is designed to be used with a CAT-iq 2.0 base station
or router. If registered to a GAP or CAT-iq 1.0 base you will be able to make
and receive external calls and have access to the local contacts.
HD Voice technology has revolutionised the telephone industry. Callers
can now feel better connected. The rich quality of HD Voice calls is more
effective and offers a superior listening experience.
After a few quick steps you can be making and receiving calls on your
CD1HD handset. Please ensure that your router has the latest software
update installed before registering a new handset.
Compatible Registering a handset to a FRITZ!Box requires FritzOS 6.80 or later
with CAT-iq installed on the FRITZ!Box before registering the handset.
Routers
Refer to the router or FRITZ!Box manual for details of how to perform a
check and install the latest software if required.
Plug in the router
Make sure the router is plugged
into the power and working
correctly.
A new dimension in voice
Extended Quick Start Guide
2
Insert the batteries
Remove the battery cover from the
back of the handset and
insert the rechargeable Ni-MH battery
cells supplied. Please
note the '+' and '-' markings
inside the battery compartment and
Batteries
insert in the correct direction.
Slide the battery cover back
into place.
Extended
Mains power
CD1HD Quick Start adaptor for
Guide the charger Important
charger
Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA
Ni-MH 750mAh rechargeable batteries) supplied with your CD1HD.
Connecting and charging the handset
Plug the power adaptor into the
socket marked on the rear of
the charger and plug the other end
into the mains power wall socket.
Switch on the mains power.
We recommend leaving the handset
to charge for 30 minutes before
proceeding to the next step.
To fully charge the batteries, place
the handset on the charger to
charge for at least
16 hours continuously.
Battery low warning
If you hear a warning beep every 60 seconds during a call, you will need to
recharge the handset before you can use it again.
When charging, will scroll on the display.
Select the required language
Once the battery is charged the list
of available languages is displayed.
u d to the required
Scroll /
1
language and press to
Select
Press down
save.
Language
English
2 Deutsch
Italiano
Slide
Français
Dutch
Español
Select
Registering the handset
The routers registration
process is dependent on the
router, follow the registration
instructions given in your routers
user guide.
Hold your CD1HD handset
within 5m of the router.
Unregistered
01/01/16 00:45
Menu Register
Press Register. The screen
displays Registering. Once
successful Registered will be
displayed and the handset will
beep and the standby screen
will be displayed.
Registered
Back
Overview of the handset Overview of the standby screen
Status bar
Ring
Indicator
LED
Left soft key
information
Display
Navigating the menu
Right softkey
Left softkey From the standby screen, press Menu.
Clear
The main menu is opened and the display will show the main menu icons.
Menu
Back
d
Use the u /
OK
Intercom
Left softkey - press to action the corresponding word prompt shown in the
lower left corner of the display.
Scroll left
Right softkey - press to action the corresponding word prompt in the lower
Contacts
Scroll up right corner of the display.
Recall key
Volume up O
Press to return to standby.
Talk
Scroll right
Hands-free
Redial
Status bar icons
Scroll down Signal icon
Volume down
Displays when in
Call list
End call hands-free mode
Power on/o
Mute is activated
Exit
Speed dial keys
Ringer is switched off
*
Change case #
Temporarily Keypad lock
Main menu icons
change from
pulse to tone
Space
Contacts
dialling
Pause
Call List
Ringer o
Microphone
Clock & Alarm
Handset
name
Date and
time
Right soft key
information
/ B (t) / r (u) keys to scroll through the menu.
Indicates a missed call
Alarm is set
Battery indicator
Call Settings
Handset Settings
Advance Settings