Sleep Operation - Fujitsu KLWA Series Owner's Manual

Sleep Operation

•
The SLEEP function is used to decrease energy use while you sleep (and don't need the same
temperature settings to stay comfortable). This function can only be activated via remote
control. Press the SLEEP button when you are ready to go to sleep.
When in COOL mode, the unit will increase the temperature by 1°C (2°F) after 1 hour, and will
increase an additional 1°C (2°F) after another hour.
When in HEAT mode, the unit will decrease the temperature by 1°C (2°F) after 1 hour, and will
decrease an additional 1°C (2°F) after another hour. It will hold the new temperature for 5
hours, then the unit will turn off automatically.
Note: The SLEEP function is not available in FAN or DRY mode.
SLEEP Operation
+/- 1 C/2 F
+/- 1 C/2 F
Set
7 hours
temperatur e
1hr timer o
1hr
Saving energy during sleep
 Page 10 