Advertisement
EMS Mode and Level Indicator
Selecting EMS Modes
Press and hold the Power / Mode button for over 1 second to turn
on the power. Press the Power / Mode button again for 1 second to
select the desired EMS mode.
The EMS mode will change each time you press the Power / Mode
button in the order shown below.
● Face mode: Blue Lamp
Select this mode for treating the face. Level 1 is for eye treatment
(Micro-current).
● Body1 Mode (Tight mode): Red Lamp
Select this mode to treat body muscles with a type of kneading
stimulation.
● Body2 Mode (Beat mode): Purple Lamp
Select this mode to treat body muscles with a type of tapping
stimulation.
Adjusting the EMS Intensity Level
Press the Level button to adjust the EMS intensity level.
The EMS level will change in the order shown below each time you
press the Level button. Select an EMS level that feels comfortable.
Level 1
Level 2
Level 3
This symbol indicates a flashing lamp
* Always start with Level 1
* Micro-current will only work when using Face Mode Level 1.
* Micro-current cannot be felt.
13
Level 4
Level 5
Treatment
Precautions for Use
Read this section carefully before use and use only as directed.
Remove any jewelry or accessories (necklaces,
●
piercings, etc.) before starting treatment to
avoid getting them tangled in the device.
To avoid getting your hair tangled in the device,
●
be sure to tie your hair up or use a hair band.
This is especially important near the hairline.
If your hair does become tangled in the device,
●
turn it off and carefully untangle your hair.
Rolling the device over your clothes may
●
damage the fabric. Use directly on the skin or
over clothes that you are not concerned about
damaging.
How to Hold the Device
Hold the device as shown at right.
●
Improper operation may occur if you
press a button accidentally while
gripping the main unit. Hold the device
carefully in order to avoid unintended
operation during use.
14
Advertisement
