Loose Parts List And Tools Needed - Ryobi BS901 Operator's Manual

Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.
3 mm Hex Key .............................................. 1
4 mm Hex Key .............................................. 1
5 mm Hex Key .............................................. 1
Miter Gauge .................................................. 1
Saw Table ..................................................... 1
Table Lock Handle ........................................ 1
Washer .......................................................... 1
Operator's Manual (not shown) .................... 1
3 mm HEX KEY
4 mm HEX KEY
5 mm HEX KEY
The following tools (not included) are needed for checking adjustments of your saw or for installing the blade:
Adjustable Wrench
Combination Square
Phillips Screwdriver
LOOSE PARTS LIST
MITER GAUGE
TOOLS NEEDED
ADJUSTABLE WRENCH
COMBINATION
SQUARE
SAW TABLE
WASHER
PHILLIPS SCREWDRIVER
Page 8
TABLE LOCK HANDLE
Fig. 2