Dell Inspiron 3670 Service Manual page 67

Advanced
USB Wake Support
Numlock Key
SupportAssist System Resolution
Auto OS Recovery Threshold
SupportAssist OS Recovery
Table 8. System setup options—Security menu
Security
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Admin Password
System Password
HDD Password
Password Change
Computrace
Firmware TPM
PPI Bypass for Clear Command
UEFI Firmware Capsule Updates
Enables you to enable the USB devices to wake the computer from
Standby.
Enables you to set the status of the Numlock key during boot to On
or Off.
Default: Disabled
Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
The SupportAssist OS Recovery option will enable or disable the
boot flow for SupportAssist OS Recovery tool in the event of
certain system errors. If the SupportAssist OS Recovery setup
option is set to disabled then all automatic boot flow for
SupportAssist OS Recovery tool will be disabled.
Default: Disabled
Displays if the setup status is unlocked.
Displays whether the admin password is set.
Displays whether the system password is set.
Displays if the hard drive password is set.
Enables you to set the admin password.
Enables you to set the system password.
Enables you to set the hard drive password.
Enable or disable changes to the System and Hard Disk
passwords when an administrator password is set.
Enable or disable tracking assets and providing recovery
services in the event the computer is lost or stolen.
Default: Deactivate
Enables you to enable or disable the firmware TPM function.
Default: Enabled
Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip BIOS
PPI user prompts when issuing the Clear command. Changes to
this setting take effect immediately.
Default: Disabled
Enables you to enable or disable the UEFI Firmware Capsule
Updates function.
Default: Enabled
System setup 67