Page 1
THANK YOU FOR BUYING A RYOBI SCREWDRIVER/FLASHLIGHT COMBINATION KIT. Your new screwdriver/flashlight combination has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble- free performance.
GENERAL SAFETY RULES SAVE THESE INSTRUCTIONS WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. WORK AREA ■ Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
GENERAL SAFETY RULES SERVICE ■ Tool service must be performed only by quali- fied repair personnel. Service or maintenance per- formed by unqualified personnel may result in a risk of injury. SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring.
SPECIFIC SAFETY RULES CHARGER SAFETY INSTRUCTIONS ■ Save these instructions. This manual contains important safety and operating instructions for charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. ■ Before using battery charger, read all instruc- tions and cautionary markings in this manual, on battery charger, and product using battery charger.
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes Alternating Current Direct Current...
Motor (Screwdriver) Collet (Screwdriver) No Load Speed (Screwdriver) Switch (Screwdriver) Maximum Torque (Screwdriver) Charger Rating Charge Time INSTRUCTIONS Your screwdriver/flashlight combination has been shipped completely assembled. ■ Carefully remove the screwdriver, flashlight, and accessories from the box. Make sure that all items listed in the packing list are included.
SWITCH Your flashlight has a conveniently located trigger switch. ANGLE ADJUSTMENT Your screwdriver and flashlight are both equipped with an angle adjustment feature that allows you to adjust the angle of the tools. BI-DIRECTIONAL ROTATION Your screwdriver has a conveniently located switch that allows you to easily change the direction of the bit rotation.
WARNING: Your screwdriver/flashlight combination should never be connected to power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when not in use. Disconnecting your tools will prevent accidental starting that could cause serious injury. INSERTING/REMOVING BITS See Figure 2.
MOUNTING CRADLE/CHARGER See Figure 5. Follow these directions when mounting the cradle/ charger. ■ Locate a convenient electrical outlet. NOTE: Temporarily place the tools in the cradle/charger to make sure they will not interfere with surrounding objects. ■ Place cradle/charger in the desired location. ■...
WARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
Page 12
Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our Web site at www.ryobitools.com for a complete list of Authorized Service Centers.