User Settings - Honeywell Lyric LCP300-L User Reference Manual

User Settings

User Name
Newly-created users are given a default name. To customize a user's name:
1. Press Name Name at upper left on the display. A keyboard appears. Name Name
2. Press Clear Clear to delete the default name.
Clear Clear
3. Enter the desired name, using as many as 10 characters.
4. Save Save. User details appear.
Save Save
5. Press Save Save Save again. The list of users appears, displaying your changes. Save
User Code
Newly-created users have no security code. To assign a code:
1. Press User Code User Code User Code. A keypad appears. User Code
2. Press Clear Clear Clear Clear if you are changing an existing code.
3. Enter a four-digit code.
4. Press Done Done Done Done. User details appear.
5. Save Save. The list of users appears. Save Save
Users and Z-Wave Lock Control
NOTE: NOTE NOTE NOTE This option appears only if Z-Wave devices are connected.
Each user can be given the ability to disarm the system by entering their code to open a Z-
Wave lock.
When creating or editing a User:
1. Set Z Z Z Z - - - - Wave Lock Control Wave Lock Control Wave Lock Control to Yes Wave Lock Control
2. Select Disarm Disarm.
Disarm Disarm
3. Press Save Save Save Save.
With this setting, entering a user code at any Z-Wave door lock in the system unlocks the
door and disarms the security system.
Yes. Z Z Z Z - - - - Wave Unlocking Door Yes Yes Wave Unlocking Door appears. Wave Unlocking Door Wave Unlocking Door
44