LG SB94PK-S Owner's Manual page 19

HB994PK-F.AIRNDLK_ENG_9793
Wireless network connection
Another connection option is to use an Access Points or an wireless router.
In the example configuration for wireless connection below, this player
would be able to access content from either of the PCs.
The network configuration and connection method may vary depending on
the equipment in use and the network environment.
This player is equipped with an IEEE 802.11n wireless module, which also
supports the 802.11b/g standards. For the best wireless performance, we
recommend using a IEEE 802.11n certified Wi-Fi network (access point or
wireless router).
Refer to the setup instructions supplied with your access point or wireless
router for detailed connection steps and network settings.
BD Player
Wireless
Communication
WAN
Note:
For best performance, a direct wired connection from this player to your
home network's router or cable/DSL modem is always the best option.
If the player is far away from your router or cable/DSL modem, Ethernet or
LAN cables are available at many stores in lengths of 50 feet and longer.
If you do chose to use the wireless option, note that performance can
sometimes be affected by other electronic devices in the home.
7/14/10 7:44 PM Page 19
PC
Access Point or Wireless Router
Broadband service
Wireless network setup
For the wireless network connection, the player needs to be set up for
network communication. This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follows.
Setting up the access point or the wireless router is required before
connecting the player to the network.
Preparation
Before setting the wireless network, you need to:
- connect the broadband internet to the wireless home network.
- set the access point or wireless router.
- note the SSID and security code of the network.
1.
2.
3.
Select the [Connection Setting]
option in the [Setup] menu then
press i or ENTER.
The [Connection Setting] menu
appear on the screen. Use U/u to
select [Wireless] and press
ENTER.
Selects [OK] and press ENTER to
continue. The new connection
settings resets the current network
settings.
19