1030 Wireless LAN card
Removal steps of the wireless LAN card
Step
Screw (quantity)
3
M2 × L3 mm, flat-head, nylon-coated (1)
When installing:
• Attach the gray cable to the connector marked "MAIN" on the card, and attach the black cable to the
connector marked "AUX".
• Ensure that the connectors are attached firmly.
1040 Audio card, speaker, hall sensor card and USB bracket
For access, remove this FRU:
• "1010 Base cover assembly" on page 54
• "1020 Battery" on page 55
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
57