Troubleshooting - Ryobi AIRgrip ProCross ELL0006 Operator's Manual

Problem
Vacuum not running.
Laser line projection is weak.
Laser line is hard to see.
Laser line is not working.
Laser line is dim.
Vacuum base won't stick to wall.

TROUBLESHOOTINg

Possible Cause
Batteries are low.
Power is turned off.
Batteries are low.
Light in area is too bright.
Line is being projected beyond the
specifications listed earlier in this
manual.
Power is not on.
Batteries are low.
Batteries are low.
Surface is incompatible for vacuum.
13
Solution
Replace batteries.
Press on/off button.
Replace batteries.
Dim light in the work area or use
laser-enhancing glasses.
Relocate laser level so that line is
projected within specifications listed
earlier in this manual.
Press the on/off button.
Replace batteries.
Replace batteries.
Use rough surface adaptor on stucco
and textured surfaces.