T&D RTR-51 User Manual

Wireless Thermo Recorder RTR-51/52 Warranty
Customer's name:
Address:
Phone No.:
Dealer's name:
Address:
Phone No.:
Guarantee period 12 months from date of purchase
Date of purchase
Statement of Limited Warranty
1. This product is warranted to be free from defects in materials and workmanship
for a period of one (1) year following the date of purchase. Should the product
fail to operate per specification in normal use during this period T&D will repair
the unit or provide a replacement free of charge. T&D will not accept returns for
any reason other than defects during the warranty period, and will not accept
any product that has been misused, dropped, abused or inappropriately used or
mistreated at any time.
2. This warranty is strictly limited to repair or replacement-in-kind for defective
product. T&D makes no other warranty, either express or implied, and will not
accept liability beyond the remedies stated herein. Specifically, T&D will not
accept liability for direct, indirect, special, consequential or incidental damages
arising from the use of this product.
3. Customers wishing to submit a defective product for repair or replacement during
the warranty period should first contact the dealer from whom it was originally
purchased. After receiving a return authorization the defective product should
then be packaged along with a description of the difficulties being experienced,
proof of purchase and all included accessories and materials, and returned it
to the dealer. In the event of difficulty contacting the original dealer, customers
should contact the nearest authorized T&D sales representative. A list of these
can be found on the company's website, www.tandd.com, or it can be obtained
by contacting TandD US directly.
4. This limited warranty statement gives the customer specific legal rights. The
customer may also have other rights which vary from state to state in the
United States, from province to province in Canada, and from country to
country elsewhere in the world. To the extent this limited warranty statement
is inconsistent with local law, this statement shall be deemed modified to be
consistent with such local law.
5. For further information relating to product repair or replacement, or for other
service questions after the termination of the warranty period, customers should
contact their local authorized T&D sales representative.
Radio, EMC and Safety Regulations
This device complies with part 15 of the Federal
Communications Commission (FCC) rules and with RSS-210
of the Industry Canada (IC). Operation is subject to the
following conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Inquiries
T&D CORPORATION
Shimadachi 817-1, Matsumoto, Nagano 390-0852 JAPAN
Tel:+81-263-40-0131 Fax:+81-263-40-3152
E-mail: support@tandd.com
Homepage: http://www.tandd.com/
Wireless Temperature Data Logger
User's Manual
Thank you for purchasing this product.
Carefully read and fully understand these
instructions before using this unit.
© Copyright 2003-2007 T&D Corporation. All rights reserved.
2009.04 16004244930 5th Edition
Product Specifications
RTR-51 RTR-52
Measurement Channels 1 Temperature Channel
Measurement Item Temperature Temperature
Internal Temp. Sensor -40 C to 80 C -
External Temp. Sensor - -60 C to 155 C
Measurement Display
0.1 C
Resolution
Avg. 0.3 C
(-20 80 C)
Avg. 0.5℃
Measurement Accuracy Avg. 0.5 C
(-40 -20 C / 80 110 C)
Avg. 1.0℃
(-60 -40 C / 110 155 C)
1,2,5,10,15,20,30 seconds / 1,2,5,10,15,20,30,60minutes,
Recording Interval
Total of 15 choices
Recording Capacity 16,000 Readings x1 Channel
Endless (Overwrite oldest data when capacity is full),
Recording Mode
One-time (Stop reading when capacity is full)
Current Readings, Recording Settings, Battery Life Warning,
LCD Display Items
Over Measurement Range Warning, Unit
Power Lithium Battery (LS14250(SAFT)) x1
Approx. 6 months / Approx. 2.5 years with RTR-05B1
Battery Life (Battery life depending on measurement environment,
recording interval and battery performance)
Wireless Method FCC Part 15 Section 249
Transmission Distance Up to 330 ft [100 meters] (May vary with conditions)
Wireless Communication
Interface
Optical Communication
When downloading data (Wireless) Approx. 2,000 readings
Communication Speed per minute [Collection of a full unit of data=Approx. 420
seconds (optical communication=Approx. 160 seconds)]
Water Resistance 1 IP67 (immersion proof) IP64 (rated for use in daily life)
*
H2.48 x W1.88 x D0.76in (excluding protrusions / antenna
Dimensions
length 0.8in) / with Large Capacity Battery Pack: D 2in
Approx. 1.98oz. (including 1 lithium battery) / with Large
Weight
Capacity Battery Pack : Approx. 3.85oz.
Unit Temp. Resistance -40 C to 80 C 3
*
Standard Sensor / Input Cable - TR-5106(length: Approx. 24in) x1
Lithium Battery (LS14250 (SAFT)) x1, Tube x1, Strap x1,
Accessories Included:
User's Manual (Warranty) x1
*1 Note: Not for continued immersion.
*2 Note: The water resistance rating with the sensor or input cable connected is IP64.
*3 Radio commnication can not be operated at below -30 C degrees or less.
Notices about this User's Manual
Please read this manual carefully before using the product.
All rights of this User's Manual belong to T&D Corporation. It is prohibited to use,
duplicate and/or arrange a part or whole of this User's Manual without the
permission of T&D Corporation.
Please follow the safety precautions carefully. We cannot guarantee nor are we
responsible for safety if this product is used in any manner other than was
intended.
T&D Corporation accepts no responsibility for any malfunction of and/or trouble
with this product or with your computer that is caused by the improper handling of
this product and will deem such trouble or malfunction as falling outside the
conditions for free repair of the attached warranty.
T&D Corporation accepts no responsibility for any result or effects from using this
User's Manual.
Safety Precautions and Instructions
To prevent any loss or damage to our customers, other people and/or property, and to ensure the proper use of our products we ask that before using
our product you carefully read, understand and follow the safety rules and precautions for our products as outlined below.
Explanation of Warning Symbols
These entries are actions that absolutely under no
DANGER
circumstance should be taken. The taking of such an action
may cause serious personal physical damage or death.
These entries are actions that if taken may lead to physical
CAUTION
injury or damage to persons or things.
Do not take apart, repair or modify the main unit.
It may cause fire, electrocution or damage. Ask the shop where you
purchased the products or T&D Corporation to carry out any repairs.
If any smoke or strange smells are emitted from the unit, immediately
cease using it.
Continued use may cause fire, electrocution or damage.
Do not use any batteries other than those that are recommended. It
may cause fire or damage.
We are not responsible for any malfunction or trouble caused by the
use of our product or by any problem caused by the malfunction of
our unit. Please be fully aware of this before using our product.
This product has been designed for private or industrial use only.
It is not for use in situations where strict safety precautions are
necessary such as in connection with medical equipment whether
directly or indirectly.
Do not drop or expose the unit to strong impact.
Do not put your fingers or foreign matter into the sensor connection.
Battery terminals may provide insufficient contact due to age or
vibration. Please be careful not to lose data due to insufficient
contact.
Battery life depends on the measurement environment,
communication frequency, recording interval and battery quality.
Pay attention to water leakage or foreign objects entering into the
unit case as in the following cases.
The case was closed with dust, hair, etc., on the rubber packing or in the
2
*
groove for the packing.
The rubber packing was damaged. (In this case, please purchase the
optional maintenance set.)
The unit suffered from significant temperature change while wet.
(Especially if the temperature change was from high to low.)
Cracks may develop in the unit casing if it comes into contact with
hazardous substances such as oil products.
When using the unit in such an environment, protect the unit by
placing it inside a polyethylene bag.
Figures and illustrations in this manual may be slightly simplified and may differ
from the actual product.
On screen messages, figures or illustrations in this manual may vary slightly or be
simplified from the actual messages and product.
We sincerely hope that the contents of this manual are true and complete. If you
find any information to have been omitted, or if the information within is confusing
or mistaken please, contact your retailer or T&D Corporation.
Microsoft ® , Windows ® and WindowsNT ® are registered trademarks of Microsoft
Corporation USA and are binding in the USA and all other countries. Company
names and product names are trademarks or registered trademarks of each
company.
The Warranty that comes with this Manual can not under any cicumstance be
reissued, so please keep it in a safe place. The Manual itself can be downloaded
from our Home Page: http://www.tandd.com
*Please carefully observe the following safety measures when using our
product.
Explanation of Picture Symbols
This symbol denotes an important warning or caution. Inside or near the
symbol will appear another symbol giving details.
(EX: stands for ELECTROCUTION)
This symbol denotes a forbidden action. Inside or near the symbol will
appear another symbol giving details.
(EX: stands for DO NOT TAKE APART)
This symbol denotes an action that you must take. Inside or near the
symbol will appear another symbol giving details.
(EX: stands for TAKE PLUG OUT OF SOCKET)
DANGER
If water or a foreign object enters the case, immediately cease using
it.
Store all batteries, sensors and Thermo Recorder units out of the
reach of children. It is dangerous to swallow batteries.
Please be careful when using in overly hot or cold environments,
touching the units may cause burns or frostbite.
The RTR-51/52 is a devices to measure temperature. Do not use this
unit for any purpose other than temperature measurement.
CAUTION
Please use the latest version of our software which can be
downloaded free of charge from our Website.
Remove batteries from any unit that is not to be used for a long period
of time.
Batteries left in a unit not being used for a long time may leak and cause a
malfunction.
Do not use or store the unit in places such as listed below:
It may cause electrocution, fire or damage to the unit or to your
computer.
Areas exposed to direct sunlight
Areas exposed to water or high-pressure water flow.
Areas exposed to organic solvents and corrosive gas.
Areas exposed to strong magnetic fields
Areas exposed to static electricity.
Areas exposed to fire or overheating.
Areas exposed to excessive dust or smoke.
TR-5106, Standard Sensor of RTR-52.
Do no fold the sensor (tip section) or expose it to a strong impact.
This may cause trouble or break the wire.
®
The sensor and the cable are shielded by Teflon . If the shield has a
defect or tear, the waterproof capacity is lost as the shield is very thin.
Inspect it before operation.
Insert the sensor tip of least 5cm or more to obtain on accurate
temperture measurement.
Only use the sensor within the sensor heat-durability range.
Avoid using the lithium batteries, LS 14250 for long periods at
temperatures over 60℃ .
The battery life may be significantly decreased.