ALDI EGHT450 User Manual page 13

500W Hedge Trimmer
Electrical safety
−Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
−Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
−Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
−Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep the cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
−When operating a power tool outdoors, use an extension cord
suitable for outdoor use, to reduce the risk of electric shock.
−Always use this power tool in conjunction with a residual
current device (RCD). Use of an RCD reduces the risk of electric
shock. The maximum operating current of the RCD must be less
than 30mA. If in doubt seek professional advice.
−The voltage indicated on the rating plate must correspond to
the voltage of the power source.
−Only use or replace power supply cables for this unit which
correspond to the types indicated by the manufacturer.
Replacement of power cords must only be undertaken by a
suitably qualified person.
13
www.coreservice.co.uk
AFTER SALES SUPPORT
+44 (0)1904 727501
GB
+353 (0)1 902 2605
IRE
GB IRE
Safety Safety Safety